Maximum AppliedPressure: 150psi (1.03MPa)
Maximum Chlorine Concentration: <
0.1ppm
Maximum Operating Temperature: 113°F (45°C)
pHRange, Continuous (Cleaning): 2-11
Maximum Feed Water TDS: 1,000ppm
Maximum Feed Silt Density Index: SDI 5
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide
Membrane Active Area: 0.56m2
Maximum Applied Pressure: 300PSI(2.06MPa)
Maximum Chlorine Concentration: <
0.1 PPM
Maximum Operating Temperature: 113° F ( 45°c)
PH Range, Continuous (Cleaning): 2-12(3-10)
Maximum Feed Water TDS: 4,500ppm
Maximum Feed Silt Density Index: SDI 5
The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:
200 mg/L NaCl solution
60 psi (0.41 MPa) Applied Pressure
77 F (25 c)Operating Temperature
15% Permeate Recovery
6.5-7.0 pH Range