Configuration: Spiral Wound

Membrane Polymer: Composite Polyamide

Membrane Active Area: 1.23m²

Maximum Applied Pressure: 300PSI(2.06MPa)

Maximum Chlorine Concentration: <

0.1 PPM

Maximum Operating Temperature: 113° F ( 45°c)

PH Range, Continuous (Cleaning): 2-12(3-10)

Maximum Feed Water TDS: 4,500ppm

Maximum Feed Silt Density Index: SDI 5

The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

200 mg/L NaCl solution

60 psi (0.41 MPa) Applied Pressure

77 F (25 c)Operating Temperature

15% Permeate Recovery

6.5-7.0 pH Range